Skip to main content
All guides
Learn

Getting Started

What the Prop Risk strip shows, how to add it to a NinjaTrader 8 chart, pick your plan and set your trade size.

Prop Risk is an indicator for NinjaTrader 8. It adds a thin strip to the chart window, in its own row above the chart, and turns the drawdown of a prop firm account into trades at your ATM size: how many dollars are left before the liquidation threshold, how many losing trades that leaves, and how many winning trades you still need to reach the target.

Prop Risk is in testing. It is not on sale yet, and this guide may change before it is.

The numbers are a planning aid. Firms change their rules, so check the rules date in the Prop Risk window (the strip shows it only once the rules are more than 30 days old) and the numbers on your firm's dashboard. The strip cannot stop you from trading.

Add Prop Risk to a chart

  1. Right click your chart and select Indicators.
  2. Find Prop Risk in the indicator list, in the Wizdough folder.
  3. Click Add, then OK.

The strip appears in its own row between NinjaTrader's chart toolbar and the chart. The chart gets shorter by the height of the strip, so the strip covers nothing. Each chart tab has its own strip: when you switch tabs, the strip shows the Prop Risk of the tab you are on, and a tab without Prop Risk shows no strip. When no plan is set, it says "click here to pick your plan".

Pick your plan

Click the plan button at the left end of the strip. The Prop Risk window opens. Its left side, Account type, has two account choices:

  • Cash is your own money. Type a Start balance, a Max loss and a Profit target. The line stays at the start balance minus the max loss.
  • Prop firm: pick the firm in the Firm list (Apex Trader Funding, Topstep, Take Profit Trader, Tradeify or Other (custom)), then click a Type (the firm's program, for example Intraday Trail or EOD Trail), a Phase (for example Evaluation or Performance Account (PA)) and a Size (25k, 50k and so on). Under these the window shows the drawdown, the target, the daily limit and the date we checked the firm's rules.

Other (custom) is the entry in the Firm list for a firm or plan we do not list. Type a Start balance, Max drawdown, Profit target and Daily loss limit ($, 0 = none), and pick a drawdown type: Trailing (intraday), Trailing (end of day) or Static. Picking Static switches the window to the Cash view: the field reads Max loss ($), the daily limit and drawdown type fields hide, and the line stays at the start balance minus the max loss.

When Plan in the Properties dialog is left on (auto from account), Prop Risk guesses the plan only for an account with "APEX" in its name. It always assumes an Apex Intraday Trail plan, takes the phase from the name (an account name starting with "PA-" or "PA_" is a PA) and the size from the balance, and a "?" follows the plan name on the strip. Open the window and check the guess.

The Help link at the top of the window opens this guide. The window closes on Esc, on Close ✕, or when you click outside it. Almost every change in the window is the same setting as in the Properties dialog, and it is saved with the workspace and the chart template. Two are not saved and reset when the chart reloads: the Instrument pick and the table view (By contracts or By my ATM templates).

Start balance

Prop Risk counts the room, the threshold and the wins you need from a start balance. Under the plan facts, the window says which start it uses, for example "Measured from $101,546 (first seen on Sim101)."

  • plan start: the account balance fits the plan, so the plan's own start balance is used.
  • first seen on the account: the balance does not fit the plan (a Sim account, or a bigger account on a smaller plan), so Prop Risk uses the balance it first saw on this account.
  • typed: the number you typed in Start balance ($).

To use your own number, type it in the Start balance ($) box under that line. Empty or 0 means auto. When you type or clear it, the tracking starts again. Cash and Custom plans have their own start balance and do not use this box.

When the start is not the plan's own, the line is amber and the strip shows a Start cell, for example "Start $101,546 first seen · edit". Click the cell to open the window at the Start balance box.

When NinjaTrader is busy with the account, Prop Risk skips that read and keeps the last numbers, so NinjaTrader never waits for Prop Risk. The next read updates them. The same line then adds "Busy reads skipped: N." It shows only when N is more than 0.

Set your trade size

The right side of the window, ATM and What-if, sets the trade size the strip counts with. A line at the top says what the strip uses now, for example "ATM template 1-20-60 on ES 12-26: 1 ct, stop 20 t, target 60 t", or "What-if on ..." for your own numbers.

Size from has three choices:

  • Chart Trader ATM (the default): the ATM template picked in Chart Trader.
  • ATM template: pick one of your saved ATM templates in the list below the choices.
  • What-if: your own numbers in Contracts, Stop (ticks) and Target (ticks). Typing in any of these fields switches to this choice. Back to the Chart Trader ATM switches back.

The fields run in this order: Instrument, Contracts, Stop (ticks), Target (ticks), then Comm. RT / ct and Tick value. Instrument starts on the chart's instrument. Picking another one (MES, NQ and so on) is a what-if: the tick value and the commission follow it. If NinjaTrader does not have that instrument, the ATM line adds a note such as "(MES not found: chart instrument used)".

Stop and target must be in ticks: set the ATM's Calculation mode to Ticks. Comm. RT / ct is the commission in dollars per round turn per contract. Tick value (in dollars) comes from the instrument and you cannot edit it. A note under the fields says where the commission comes from:

  • "Commission from the Take Profit Trader rules: $4.50." The firm sets the commission, and the plan's value is used instead of the one you type.
  • "Commission is assumed (Apex rate not found). Edit it." We have no rate for this firm, so the strip uses the number in the commission field (4.50 until you change it). Type your own.
  • "Commission: your own rate. Edit it." Cash and Custom plans use the rate you type.

Read the strip

The numbers update about 4 times a second from your account, whatever the indicator's Calculate setting is.

From left to right (in a position, two of the cells change: see In a position):

  • Plan button: the plan name with a caret and no outline. It shows the firm, size, program and phase in short form, for example "Apex 50k Intraday Trail Eval ▾". A " ?" after the name means the plan was guessed from the account name. The date we checked the firm's rules is in the window. The strip shows it only when the rules are more than 30 days old, as "rules old, " and the date. Clicking the button opens the window with a small pointer under the button.
  • Start: shows only when the plan is not measured from its own start balance, for example "Start $101,546 first seen · edit". See Start balance.
  • Room: dollars left before the liquidation threshold, with a bar whose length is the room left. Its filled part runs from red at the left through amber to green at the right, so a low bar is short but still shows all three colors. The dollar value turns red when less than a quarter of the drawdown is left.
  • Threshold: the liquidation line in dollars. It says "locked" once the line has stopped trailing.
  • Stops left: how many stop outs you can take at the current size, which the label names, for example "Stops left (1 ES, 20 t)". The big number is the plain count: each trade goes straight to its stop. On an intraday trail plan, "worst N" beside it is the worst case: each trade first runs up to 1 tick short of its target, then stops out, and that run up moves the line, so the worst case can be lower. Other plans show only the plain count. With no room left the cell shows 0 and "at the line", or "at limit" when the room left is less than one stop. When the daily loss limit allows fewer stops, it says "daily limit N" instead. When the daily limit is used up, the cell shows 0 and "daily limit".
  • Wins to target: winning trades still needed. Plans with no target show n/a (no target). n/a with win < commission means a win does not cover the commission.
  • Break-even win rate: the win rate this ATM needs after commission. Above 70% it turns red and shows "!".
  • Daily loss limit: "none" for plans without one. Otherwise what is left today, for example "$640 left" of $1,000.

At the right end, ? opens this guide. The strip has no What-if button: open the window from the plan button or from the Prop Risk ▾ button in the chart toolbar, then pick What-if in Size from. Next to that button, two chips name the account and the ATM in use, for example "Account: Sim101" and "ATM: 1-20-60". Each says "none" when nothing is picked, and the ATM chip says "ATM: What-if" while you use your own numbers. The chips hide with the button.

In a position

When you hold a position on the chart's instrument and account, Stops left and Wins to target show live numbers with a LIVE tag. Prop Risk counts them from your real stop and target orders, measured from your average entry price, with the same commission. A small second line keeps the ATM numbers:

  • Stops left: for example "ATM: 3 · if stopped now: room $1,696". The room is what is left if the stop fills now. When the daily loss limit is closer, it says "daily room" instead.
  • Wins to target: for example "ATM: 17 · if target hit: to go $2,954". With no target order, the cell uses the ATM target and says so. When the ATM has no target for this instrument either (a What-if on MES, for example), it shows n/a and "no target order".

The Stops left cell turns amber when fewer stops are left than at your ATM, and red at 1 or less. A stop that is past your entry, in profit, shows "no risk". With no stop order, or a stop for only part of the position, the cell shows a red NO STOP and how many ticks away the liquidation is.

The ATM number comes from your saved ATM template with the same name as the Chart Trader ATM. NinjaTrader moves the live ATM brackets when you drag the stop on the chart, but the ATM number stays the same. With no saved template of that name in ticks, Prop Risk uses the live ATM brackets, and they move with the stop.

Lines on the chart

When you are flat, two dashed lines start from the newest price: "ATM target +N t" and "ATM stop -N t". Their prices show as markers on the price axis. They show where this ATM's target and stop would sit if you entered now. The chart scale makes room for both lines only while the newest bar is on screen. A line that runs behind the drawdown box ends to the left of it. In a position, NinjaTrader's own ATM order lines show instead, and a dashed red Liquidation line marks the price where your equity touches the threshold. Its label moves to the left of the drawdown box when it would sit behind it. Next to it, a dashed green Profit target line marks the price where your equity reaches the plan's profit target, with its price on the price axis. A plan with no profit target has no such line. While the newest bar is on screen, the chart scale makes room for the ATM order lines, and for the Liquidation and Profit target lines when they are near the price. A line far from the price stays off the chart, so the candles stay readable. The strip still shows the threshold. Show liquidation and profit target lines in the settings turns all of these Prop Risk lines on or off.

The What-if table

Under the size fields, the What-if table has two views:

  • By contracts: one row for each contract count from 1 up to the plan's limit, at most 10. A plan with no contract limit (Cash or Custom) gets 6 rows. If your current size is larger, its row is added too. The columns are contracts, Loss / trade, Losses left (the plain count, with the worst case in brackets, or "(N daily)" when the daily limit is smaller; plans with no worst case show no brackets), Win / trade and Wins needed. The row of the size in use is highlighted, and a row turns pink when no plain loss is left. Hover the Losses left header for a short reminder: "Plain count first; in brackets the worst case (the trade first runs up to 1 tick short of the target) or the daily loss limit, when smaller." The commission shows in the note above the table.
  • By my ATM templates: one row for each of your saved ATM templates. A template that is not in ticks says so.

The drawdown box

A small box on the chart (at the bottom right at first) draws three lines over time: "balance (spikes = open profit)", "liquidation threshold" and "profit target" (dashed). The legend sits at the bottom in two rows: "balance (spikes = open profit)" and "liquidation threshold" first, then "profit target". A grey dotted line marks the start balance. The dashed profit target line shows only when the plan has a target. A bar marks the room left. The value axis labels the profit target and the start balance. When one of them is far outside the plotted range, its line sits at the top or bottom edge, and its label gets an arrow (▲ or ▼). The time axis reads "time (days N)". It shows only the points Prop Risk saw itself while the strip ran on this account and plan. It is not your full trade history, so on a new chart it says "The line builds up while the strip runs." The box title reads "DRAWDOWN LINE". Drag the box by its title to move it anywhere on the chart. The x at its top right turns it off. In the window, Drawdown box has On and Off, and while it is on, four corner buttons (Top left, Top right, Bottom left, Bottom right) put the box back in a corner. The settings have the same choices: Show drawdown box and Drawdown box position.

When something is missing

  • click here to pick your plan: no plan is set yet. Click the message.
  • no ATM: pick one in Chart Trader, or open Prop Risk and pick What-if: Chart Trader has no ATM template. Pick one there, or type a size in the window.
  • no Chart Trader: open Prop Risk and pick What-if to type a size: the chart has no Chart Trader open. Open it, or type a size in the window.
  • ATM ... is not in ticks: open Prop Risk and pick What-if: the ATM uses another Calculation mode. Set it to Ticks, or type the size in the window.
  • ATM ... has no stop or no target: open Prop Risk and pick What-if: the ATM needs both a stop and a target. Add them, or type the size in the window.
  • no account: open Chart Trader or pick an Account in the settings: Prop Risk does not know which account to read.
  • waiting for account values: NinjaTrader has not sent the account balance yet.
  • account not readable right now: Prop Risk cannot read the account at the moment.
  • rules file not found, rules file cannot be read or rules file has an error: Prop Risk cannot read the firm rules that ship with it, so the window has no Firm list and says "The firm list could not be read. Pick Custom and type your numbers." Set Plan to Custom in the settings, or click Cash in the window, then type your numbers. Please tell our support too.

If the threshold on the strip does not match your firm's dashboard, type the dashboard number in Threshold now ($). The Settings page explains it.